FIRMWARE BELLPHONE BP180

FIRMWARE BELLPHONE BP180

READ DARI HP BARU TESTED

Salam sukses gan, pada kesempatan ini saya akan share firmware "Bellphone Tab Bp180 Astro" hasil dari read smartphone baru dan langsung admin tes.

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D00F69C653259CF
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00F69C653259CF
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x1B91D2FF812B0C743E8800351FCCF433
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : Bp180
ProdName  : kt07c_honghd
ProdModel : Bp180
Device    : Bp180
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : KT07C.3G-20151008

[Read Ok] : preloader_wsvga.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wsvga / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 880 MiB
Scatter saved to : 
C:\Users\FILEHANDPHONE\Desktop\MT6572__Bp180__Bp180__Bp180__4.4.2__KT07C.3G-20151008\

All done!

1. TIPE BP180 ADA 2 VERSI, SALAH FILE BISA NGEBANK DLL
2. BERIKUT INI SAYA SHARE 2 VERSI TERSEBUT
3. FIRM1 TY0712B (TY0712B_3G-HD-2_KK_V3.7.1_151029)
4. FIRM2 K706B (MT6572__Bp180__Bp180__Bp180__4.4.2__KT07C.3G-20151008) 
5. NAMUN FILE INI PREMIUM(NOT FREE) HANYA 20K PERFIRMWARE
6. SILAHKAN CONFIRMASI PASS KE 085882632739 (BUKAN NOMOR INI YG DIISI)
   FILE TESTED KARENA AMBIL/READ DRI HP BARU

• maaf file ini terpaksa donasi sedikit kok untuk kelancaran upload file2 selanjutnya trimakasih salam teknisi usb

• perhatian!!! ingat kerusakan bootloop,restart,hank sayangnya telah berhenti dll bukan100% software bisa jg hardware,segala resiko dan hal2 yang tidak diinginkan setelah flasing bukan tanggung jawab kami di tanggung sendiri2 bila belum ahli mengerjakan serah kan pada ahlinya

FIRMWARE SPC L52 F* TESTED

FIRMWARE SPC L52 F*

TESTED READ  DARI HP BARU

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand       : SPC

Device Model      : L52F

Device CPU         : SPC

Device IntName   : sharkls_xx08

Device Version     : 7.0

Device Compile    : 27/01/2018 6:50:00

Device Project      : N_SPC_L52F_V03_20180129

Device ExtInfo     : L52F

  
Untuk lebih jelasnya silahkan lihat gambar disamping
perhatikan dudukan Simcard, Dudukan memory card,
Camera agar tidak terjadi salah flash smartphone-nya.

Silahkan Download Dibawah ini :

• SPD TOOL R4
• DRIVER SPD
• FIRMWARE L52F*

NAMUN FILE INI PREMIUM(NOT FREE) HANYA 20K

SILAHKAN CONFIRMASI PASS KE 085882632739 (BUKAN NOMOR INI YG DIISI)

FILE TESTED KARENA AMBIL/READ DRI HP BARU

Firmware ASLI hasil sedot pakai Infinity CM2 dongle dan langsung tes...Done..
 

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key

3. Insert cable

 ====  Wait for phone...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC983x eMMC Loader v5.0 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC983x eMMC Loader v5.0 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC983x eMMC Loader v5.0 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : sharkls_xx08

Model Brand : SPC

Model Device: L52F

AndrVersion : 7.0

BaseBand CPU: SPC

Project Ver : N_SPC_L52F_V03_20180129

Model Ext   : L52F

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : nvitem_l.bin

[Read Ok] : sc983x_cp1.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : l__WPH_arm7.bin

[Read Ok] : PM_arm7_sys.bin

[Read Ok] : logo_720x1280.bin

[Read Ok] : fblogo_720x1280.bin

[Read Ok] : wcn_fdl.bin

[Read Ok] : AA_MARLIN.bin

[Read Ok] : boot.img

[Read Ok] : trustos.bin

[Read Ok] : vmm.bin

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2710 MiB

Done!

Perhatian!!! kerusakan Restart,Bootloop,hank sayangnya telah berhenti, dll Bukan100% software, Bisa juga disebabkan hardware, Segala resiko dan hal-hal yang tidak diinginkan akibat flash bukan tanggung jawab kami, Apabila belum ahli mengerjakan serahkan pada ahlinya.

FIRMWARE MAXTRON V15

FIRMWARE READ HP BARU 100% TESTED

MAXTRON V15 ANDROID NOUGET 7.0

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand              : MAXTRON

Device Model             : V15

Device CPU                : MAXTRON

Device IntName          : V15

Device Version           : 7.0

Device Compile          : 06/12/2017 1:33:08

Device Project             : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Device ExtInfo           : V15

Untuk lebih jelas lihat gambar di samping perhatikan 

Camera,SimCard,Konektor Batre dan Memory harus sama 

Siapkan kelengkapan flashing seperti dibawah ini : 

• Pc/laptop

• Kabel Data

• Driver SPD

• SPD TOOL R4

• DRIVER SPD
• FIRMWARENYA V15

• NAMUN FILE INI PREMIUM(NOT FREE) HANYA 20K
  SILAHKAN CONFIRMASI PASS KE 085882632739 (BUKAN NOMOR INI YG DIISI)
  FILE TESTED KARENA AMBIL/READ DRI HP BARU

 File di sedot dari smartphone yang baru dan langsung di test Done!!!

  

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key

3. Insert cable

 ====  Wait for phone...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x eMMC Loader v7 InfinityBox

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x eMMC Loader v7 InfinityBox

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x eMMC Loader v7 InfinityBox

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : V15

Model Brand : MAXTRON

Model Device: V15

AndrVersion : 7.0

BaseBand CPU: MAXTRON

Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : trustos.bin

[Read Ok] : vmm.bin

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : fbootlogo3.bin

[Read Ok] : fbootlogo4.bin

[Read Ok] : fbootlogo5.bin

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2537 MiB

Saved to : E:\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\

Done!

TERIMAKASIH TELAH BERKUNJUNG, SALAM TEKNISI USB